Click on the image to check the artwork
Introduction
This LH1050-1220-12 Spiral Welded Pipe Machine was made for producing spiral welded pipes of O.D. range φ168 mm to 1220mm and wall thickness range 4 mm to 12 mm.
Main Specification
Coil Specification
|
Material: Carbon steel, Q195, Q215, Q235, Q345
Strip thickness: 4 ～12 mm Strip width: 350～1050 mm Coil I.D.: Φ610-760 mm Coil O.D.: Φ1100-1800 mm Coil weight: ≤15 T Product pipe specification O.D. range: Φ168～Φ1220 mm Wall thickness range: 4 ～12 mm Pipe weight: Max. 4T |
Spiral angle: 40°～ 80°
Pipe screw pitch: Max. 1350 mm
Length: 8-12.5 m
Machine specification
Machine type: LH1050-1220-12
Forming type: Front swing, stop during coil change, center positioning
Forming angle: 40°～ 80°
|
Welding speed: 0.5～2.2 m /min Welder: Hanyanweida DC-1600×2 Welding type: Internal and external single wire submerged arc welding Pipe unloading type: Inclined platform unloading Installation capacity: 500 KVA Output: ～25,000T Area: 18m × 80m Source requirement Electric: 220/380V; 50Hz Air compressor: 0.4 – 0.6 Mpa |
|
http://www.huayeequip.com/